12Jul

Fitter and Turner

Candidate Key Performance Outputs

  • Assist with breakdowns and assist with the reduction in downtime periods within the relevant operational unit to limit unnecessary costs.
  • Install, maintain, and repair all mechanical equipment and systems at the relevant operational unit.
  • Report on breakdowns to management and record it on daily log sheet.
  • Ensure job cards are filled in correctly and signed off by relevant manager.
  • Dismantle, assemble and repair or replace faulty equipment and defective parts.
  • Continuously do fault-finding and problem- solving on mechanical equipment.
  • Visual inspection of parts on a daily basis.
  • Comply with all Occupational Health and Safety requirements.

 

Candidate Requirements/Experience

  • Grade 12 or NQF4.
  • N3 Mechanical engineering.
  • Valid Fitter and Turner Trade Certificate.
  • At least 3 years’ proven experience in welding.
  • Valid driver’s license.
  • A willingness to work overtime, shifts and weekends when required.

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

11Jul

Millwright Artisan

Candidate Key Performance Outputs

  • To replace and / or repair defective electrical and mechanical components and devices at wastewater treatment plants, pump stations and potable water care works
  • To test the plant and equipment to assess operating functionality and safety
  • To perform preventative, Adhoc break down/emergency and schedule shutdown maintenance
  • Ensure that internal transactional documentary (time sheets, log sheets and equipment progress reports) and related forms and timeously and accurately completed.

 

Candidate Requirements/Experience

  • N3/Matric or NQF Level 4 and Millwright trade certificate
  • 3 years’ experience related to maintenance
  • Experience of working with transformers, rotating machinery, and LV process plant would be advantageous
  • Willingness to work long work hours
  • Computer literacy

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

02Jul

Fitters Assistant

Candidate Key Performance Outputs

  • Housekeeping on a daily basis
  • General workshop duties i.e. maintaining the cleanliness of the workshop and tool store
  • Cleaning of tools
  • Identify and able to select appropriate hand tools
  • Able to use basic power tools
  • Able to do to minor/ basic technical tasks
  • Demonstrate appropriate knowledge of workshop safety
  • Assisting Artisans with various tasks as and when required

 

Candidate Requirements/Experience

  • Grade 12
  • Basic knowledge of Health and Safety rules
  • Ability to handle tools i.e. cutting machines
  • Previous experience in the same or similar role advantageous
  • Adhere to Health and Safety rules and regulations

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

02Jul

Millwright Fitter (Red Seal)

Candidate Key Performance Outputs

  • Planning to schedule , reporting, inspection and repairing is carried out.
  • Perform all relevant statutory checks as required.
  • Demonstrable ability to identify, locate and repair faults in electrical control equipment.
  • Precisely assess the equipment for repair according to workshop manuals, parts lists and best working and engineering practices.

 

Candidate Requirements/Experience

  • Be a qualified Artisan: Millwright
  • 5 years experience in the steel industry namely manufacturing
  • Have sound knowledge of engineering and plant equipment
  • Hands on individual
  • Be confident and assertive
  • Be willing to learn
  • Work overtime as required and perform standby.
  • Be able to work under immense pressure.

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

18Jun

Hydraulic Fitter & Turner

Candidate Key Performance Outputs

  • Repair of a variety of hydraulic and pneumatic equipment
  • Operation of a conventional lathe and desktop milling machine
  • Calibration and quality assurance
  • General safety and housekeeping.
  • Scheduled inspections on CMMS generated tasks
  • Stock take, labelling, sorting and ordering
  • Occasional in plant measuring where it is not feasible to get an assembly into the workshop

 

Candidate Requirements/Experience

  • Qualified Fitter (& Turner) with a relevant N3 or Technical Matric.
  • Hydraulic knowledge will be an added advantage
  • Must be a good team player, be pro-active.
  • Must be flexible to adapt to short notice changes in daily workshop requirements as set by Team manager
  • Work at an acceptable tempo as to ensure throughput in workshop
  • Have knowledge of basic machine tools and equipment (if qualified fitter &turner)
  • Have good working knowledge of power tools and gas heating equipment

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

09Jun

Maintenance Handyman

Candidate Key Performance Outputs

  • Weekly inspection and repair to all damaged carpentry including benches, balustrades and dust bins.
  • Repairs to doors including cupboard handles, hinges, etc. Replace complete doors.
  • Replace defective locks, barrels hinges, catches, door closers etc or on instruction. 
  • Ensure that all full bores, drains, waste gullies, etc are operational. 
  • Repairing of blocked drains, basins, down pipes, etc.
  • Repairing and fitting of flush masters, taps, cisterns, toilet seats etc. 
  • Assist sub-contractors with the location of shut off valves when required.
  • Optimise water usage by setting the flush masters.
  • Identify and repair water leaks.

 

Candidate Requirements/Experience

  • Grade 12 or equivalent
  • 3 years maintenance experience in Electrical and Plumbing an advantage
  • Knowledge of Health and Safety Regulations.
  • No criminal record
  • Knowledge in electrical/or/Mechanical maintenance

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

26May

Electrician with Wiremans License

Job Duties/Responsibilities will include:

  • Equipment operation and maintenance
  • Ensure safe, efficient and accurate maintenance of equipment according to maintenance procedures, instructions and schedules.
  • Follow all maintenance related processes and procedures as required by the maintenance management system
  • Report on maintenance activities as required Conduct regular risk assessments and audits and identify high risk areas and initiate appropriate corrective action
  • Implement safety related corrective actions and strategies.
  • Continuous Improvement
  • Initiate, participate and implement improvement programs and initiatives.

 

Candidate Requirements/ Experience:

  • Matric (N3)
  • Trade Tested
  • Wiremans License
  • 3 years post trade test experience in manufacturing industry
  • Be available to support the organisation / facilities in times of emergencies

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

28Mar

Electrical Draughtsman

Candidate Key Performance Outputs

  • Collaborate with engineers to develop accurate and efficient electrical layouts for high-voltage substations.
  • Revise and update existing drawings based on project specifications and feedback.
  • Ensure compliance with industry standards, client requirements, and company procedures.
  • Maintain drawing records and project documentation, ensuring version control and accuracy.
  • Coordinate with multidisciplinary teams, including civil, structural, and mechanical departments, to ensure seamless integration of electrical designs.
  • Participate in design reviews and provide technical input during project meetings.

 

Candidate Requirements/Experience

  • Minimum of 3-5 years of experience as an Electrical Draughtsman, with a strong focus on substation design and layout.
  • Advanced knowledge of MicroStation. Experience with AutoCAD is a plus.
  • Diploma or degree in Electrical Engineering, Drafting, or a related field.
  • High level of accuracy in preparing and reviewing technical drawings.
  • Excellent verbal and written communication skills with the ability to work collaboratively within a team.

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

24Mar

Tipper operator

Candidate Key Performance Outputs

  • Safely operate a tipper truck to transport materials such as sand, gravel, asphalt, and debris to and from construction sites.
  • Perform pre-trip and post-trip vehicle inspections, ensuring the truck is in safe operating condition.
  • Accurately follow delivery instructions and maintain delivery logs.
  • Adhere to all traffic laws and safety regulations.
  • Properly operate the hydraulic tipping mechanism.
  • Assist with site preparation, including clearing debris and leveling ground.
  • Perform general labor tasks, such as:
  • Assisting with material handling and organization.
  • Basic carpentry work, such as building temporary structures or formwork.
  • Assisting with concrete work.
  • Assisting with basic site maintenance.
  • Operate other construction equipment as needed.
  • Maintain a clean and organized work area.
  • Perform minor repairs and maintenance on construction equipment and tools.
  • Assist with site maintenance, including fixing fences, repairing minor damages, and general upkeep.
  • Utilize general handy man skills to solve on site problems.
  • Comply with all company safety policies and procedures.
  • Identify and report potential safety hazards.
  • Wear appropriate personal protective equipment (PPE).

 

Candidate Requirements/Experience

  • Matric
  • Code 10 Driver’s License
  • Clean driving record.
  • Proven experience operating tipper trucks in construction environments.
  • Solid understanding of construction site operations and safety procedures.
  • Basic knowledge of construction materials and methods.
  • Proficiency in using hand and power tools.
  • Ability to perform physical labor in various weather conditions.
  • Strong work ethic, reliability, and punctuality.
  • Good communication and teamwork skills.
  • Computer skills an advantage

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

23Mar

Millwright Apprentice

Candidate Key Performance Outputs

  • The willingness to be mentored and trained by qualified artisan trainers.
  • Taking responsibility of the training log book and ensuring it is assessed by subject matter experts.
  • Ensuring housekeeping.
  • Observe Health, Safety and Environment rules and regulations.

 

Candidate Requirements/Experience

  • Matric/Technical Matric.
  • Minimum N2-N6 with Mathematics, Physical Science, Engineering drawings and Trade theory.

 

If you have not been responded to within 21 days of the closing date please accept that your application was not successful.

Ad